Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle






See the difference
Before
After
Before
After
Before
AfterBurst Pipe Restoration in Houston, TX
A burst pipe can dump several gallons of water into your home every minute. In Houston’s clay-heavy soil, where foundation shifts are common, pipes fail without much warning. Burst pipe restoration means removing the water, drying the structure, and repairing the damage so your home returns to its pre-loss condition. At Dryden Restoration Houston, we do that work to IICRC standards, with a written price before any tool is touched. If you’re standing in water right now, call (254) 277-4577. A live person answers, day or night.
If the water is still off and you want to understand what happens after the plumber leaves, read on. This page covers what burst pipe restoration actually involves, what it costs in Houston, and how we approach every job. It also explains the part most restoration companies won’t put in writing: the guarantee. For a broader look at what restoration includes, see our Water Damage Restoration in Houston page.
What Burst Pipe Restoration Actually Involves
Restoration isn’t just pulling out wet drywall. It’s a science-based process. After a pipe bursts, water moves through wall cavities, under baseboards, into subflooring. Some of it evaporates. Some of it wicks upward into drywall, a process called capillary action. If the moisture isn’t fully removed, you’re left with hidden pockets that feed mold growth months later. Our technicians use psychrometric drying, which means we measure the relative humidity (RH) at multiple points in the room and adjust our equipment until the materials reach their dry standard. That’s the number that tells us the structure is actually dry, not just dry to the touch.
The short version: burst pipe restoration is Emergency Water Extraction, controlled drying, and structural repair, done in that order and never rushed. In Kingwood and the Energy Corridor, where homes were built in different decades with different materials, the drying approach changes. A 1970s slab-on-grade home in Spring Branch dries differently than a 2010s raised foundation in Cypress. We adjust the plan to the house, not the other way around.
When You Need Burst Pipe Restoration
Most people don’t call us the moment a pipe bursts. They call after the plumber has capped the line and the water is still sitting in the walls, often needing our Water Damage Restoration services. Here are the situations where our crews in Houston get called most often:
- You came home to standing water. A supply line under a sink or behind a washing machine gave way while you were at work. The plumber fixed the pipe, but water has already soaked into the base cabinets and flooring.
- You heard water but couldn’t find it. A pinhole leak inside a wall can run for weeks before it shows. The first sign is often a musty odor or a soft spot in the drywall, not a visible puddle.
- An uninsulated attic pipe froze during a hard freeze. Houston doesn’t freeze often, but when it does, pipes in North-facing attics in neighborhoods like Oak Forest and Garden Oaks are the first to go. Our restoration work starts after the pipe thaws and the leak is stopped.
- Your water heater tank split. It’s technically a burst tank, not a pipe, but the result is the same: 40 to 50 gallons of water across the garage floor and into the wall it shares with the house.
- You’ve already started drying it yourself and it isn’t working. Box fans and a dehumidifier from the hardware store can’t produce the airflow or the moisture removal rate needed for structural drying. If the RH in the affected room stays above 60% after 48 hours, you need professional restoration.
- Your insurance adjuster asked for a dry-out report. Insurance companies want to see documentation from a restoration company that follows recognized standards. We provide that.
Our Burst Pipe Restoration Process
Here is exactly what happens when we take your call in Houston.
- You call, a live person answers. That’s it. No phone tree. No “leave a message and we’ll get back to you.” The person on the phone asks where the water is, when it started, and whether the source is stopped. Then we give you a named arrival window, not a four-hour range.
- We inspect and document. A background-checked, uniformed technician shows up in a Dryden truck at the time we said. We map the moisture using meters and thermal imaging, identify what’s wet, and check behind walls and under flooring for hidden pockets.
- We give you a written price before any work starts. No verbal ballpark before we begin and a surprise invoice after. You get a written scope of work and a written price. If the number is different from what you expected, you can stop there. The price does not change at the door.
- We extract and dry. Standing water comes out first. Then we place professional-grade equipment: Dri-Eaz dehumidifiers, Phoenix airmovers, and XPOWER units where needed. These are the same machines commercial restoration crews use in office buildings and schools, not rental-store units.
- We monitor until the materials hit dry standard. We don’t set equipment and disappear. We return on a schedule, take RH and moisture content readings, and move equipment as the drying front shifts. Our crew stays on the job until the numbers say it’s done, not until a clock says we’re finished.
- We repair the structure. Drywall, insulation, baseboards, flooring, and any damaged framing get replaced or repaired. Then we clean the work area and put the furniture back where it was. Our crews leave the site cleaner than they found it, which is how we’ve run jobs since 2005.
Burst Pipe Restoration Pricing in Houston
Most burst pipe restoration jobs in Houston cost between $1,200 and $4,500. That range is wide because two things drive the price: how far the water traveled, and what it soaked. A supply line break under a kitchen sink that’s caught quickly and dried within a few days will land on the low end. A pipe that burst in a second-floor wall over a weekend and caused Ceiling & Roof Leak Water Damage through the subfloor and both wall cavities will land higher. Here’s how it breaks down in our market:
| Line Item | Typical Houston Range |
|---|---|
| Water extraction and initial cleanup | $300 – $750 |
| Structural drying (3 – 6 days of equipment) | $800 – $1,800 |
| Drywall and insulation removal | $200 – $500 |
| Drywall replacement and finish | $600 – $1,400 |
| Baseboard, trim, and painting | $250 – $700 |
| Flooring repair or replacement (affected area only) | $500 – $2,500 |
What moves the number in Houston specifically: the age of the home (older shear-wall construction can be harder to dry than newer open-plan framing), whether the water was clean supply water or from a water heater (water heater water brings sediment and an extended flush), and whether the break happened in an easily accessed area or behind cabinetry that must be removed and reset. Every one of our estimates includes a written price before work starts and a written 365-Day Done Right Promise after the job is done. You can call (254) 277-4577 any time for a free estimate, and you’ll get a number, not a story.
Why Houston Homeowners Call Dryden Restoration Houston
When a pipe bursts, the company you call shows up inside your house. That’s a trust decision, not just a repair decision. We’ve been serving Houston-area homeowners since 2005, as part of the Kingswell family of independently owned restoration businesses. Our approach at the home services level is built on The Kingswell Way, which sounds formal but comes down to this: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That last piece is the one that matters most to people who have been burned before.
The 365-Day Done Right Promise means if a covered repair fails within a full year, we come back and make it right at no charge. That includes a free second visit if the repair fails inside the guarantee period. It’s not a verbal assurance. It’s a line in a written document on every job. Our technicians are background-checked and uniformed, so you know exactly who is walking through your door. And every person who answers our phone is a live human being, 24 hours a day, 7 days a week. Not a voicemail. Not a call-back queue.
Neighborhoods We Serve in Houston
Our crews work across Houston and the surrounding communities. That includes Katy, Cypress, Sugar Land, The Woodlands, Pearland, Spring, Tomball, Kingwood, Humble, Pasadena, Baytown, Missouri City, League City, and Clear Lake. It also includes the older inner-loop neighborhoods where building materials and drying times vary house by house: Heights, Montrose, Bellaire, West University, Meyerland, and Sharpstown. If you live in a part of Houston we haven’t named, call anyway. If we can’t get to you inside the window you need, we’ll tell you directly.
FAQs – Burst Pipe Restoration
How long does burst pipe restoration take?
Most Houston burst pipe restoration jobs take 3 to 6 days from the first visit to the final walkthrough. The drying portion usually accounts for 3 to 4 of those days, depending on the materials involved and the relative humidity in the affected space. Call (254) 277-4577 and we’ll give you a timeline for your specific job.
Will my homeowners insurance cover burst pipe restoration?
In Houston, most standard homeowners policies cover sudden and accidental discharge of water, including a burst pipe, if the damage wasn’t caused by neglect or a lack of maintenance. We document every stage of the restoration with photos, moisture readings, and a written scope of work, which is the paperwork adjusters expect. Your policy, your deductible, and your coverage are between you and your carrier; we provide the documentation and the work.
Do I need to fix the pipe before you arrive?
Yes, the water source must be shut off before restoration starts. If you can’t reach a plumber, we can recommend one. We can’t dry a space that’s still receiving water, and no restoration company should claim otherwise.
How much does a small burst pipe repair cost in Houston?
A small, contained pipe burst in Houston, where the water is caught quickly and only one room is affected, typically runs $1,200 to $2,200 for full Flood Cleanup and restoration. The price depends on what got wet and whether drying equipment can reach it without tearing out cabinets or flooring. We’ll give you a written estimate before any work starts, and that estimate is free.
What is the 365-Day Done Right Promise?
The 365-Day Done Right Promise is our written guarantee that if a covered repair fails within one year, we return and correct it at no charge. It’s part of The Kingswell Guarantee on every job we do, and it applies to the workmanship and materials we install. If something goes wrong inside the guarantee period, the return visit costs you nothing.
One Call Ends the Water Problem
If you have a burst pipe in Houston and need restoration, call (254) 277-4577. A live person will answer, we’ll schedule a named arrival window, and we’ll give you a written price before any work begins. You’ll know what it costs, when we’ll be there, and what happens if something fails later. That’s how we’ve worked since 2005, and it’s how we’ll work on your home.
Written by Carl Brandt, Owner at Dryden Restoration Houston, serving Houston.